The warm weather of summer is on the horizon, and what better way to cool off than with a plunge in your above-ground pool? However, before you dip, you should check to see if your pool is level. Above-ground pools can be dangerous if they are not level, so check sure yours is before diving in.
Anyway, if water is in the above-ground pool, you may find it difficult to get it level. So, How to level above ground pool with water in it?
To pry the pool up, you’ll need to dig under the post and the surrounding bottom track with a flat or spade shovel. You’ll need some sort of cantilever, so stock up on wood or stone. This article will explain, in detail, how to adjust the water level in an above-ground pool.
Why is it important to level above-ground pool
Regarding safety, efficiency, and the pool’s lifespan, nothing is more important than a properly leveled above-ground pool.
The primary concern is the potential risk to the safety of swimmers, especially small children and those with less swimming expertise. One’s balance can be disrupted and safety compromised if one side of the pool is significantly deeper.
It’s also possible for the pool’s walls and liner to sustain damage if the pool isn’t properly leveled. Bowing walls from uneven pressure is a common cause of pool leaks and cracks. If the pool is not level, the water will pool in one area, which can strain the pump and other components unnecessarily.
The pool’s ability to perform properly also relies on its level. Due to chemical imbalances and filtration issues, a pool that is not level can have deeper water at one end than the other.
Finally, if you want to get more use out of your above-ground pool, consider having it leveled. Inexpensive repairs or replacements may be necessary if the pool is not leveled properly. Keeping your pool at a consistent level can avoid these problems and extend the life of your pool.
How To Level Above Ground Pool With Water In It (Step By Step Process)
Even though it may appear impossible, an above-ground pool with water in it may be leveled quickly and easily if the proper tools and procedures are used. To properly adjust the water level in your above-ground pool, follow these steps:
Tools And Materials Required
There are a few things you’ll need in order to level an above-ground pool that already has water in it. The items you’ll require are as follows.
- Level
- Measuring tape
- Shovel
- Rake
- Sod cutter
- Tamper
- Wheelbarrow
- Garden hose
- Two-by-four planks
- Twine
- Sand
- Tarp
Step-1: Let’s Get the Water Out
You should empty some of the pool’s water before starting. The water level should be low enough to adjust the legs but not so low that it presses against the pool’s walls. Once the water level drops to about six inches below the skimmer, you should drain it.
Step-2: Finding the Low Point
The next step is to locate the pool’s lowest point. You can use a string level or a carpenter’s level for this purpose. Begin your level-checking inspection at the pool’s highest point. Then, head to the deep end of the pool for another look. The low point is located in the place where the level is most obviously off.
Step-3: Dig Up the Dirt
After finding the depression, dig out the ground beneath the pool’s pillars. Carefully excavate the area around the pool with a shovel or garden trowel to avoid puncturing the liner.
Step-4: Fill in the low spots with soil
You can fix your pool’s uneven surface by adding soil to the high regions. Fill up any low areas using the soil you dug up from the low area.
Step-5: Make sure everything is level.
Check for levelness once more after you have excavated the low area and backfilled the high areas. Make sure the pool is horizontally and vertically straight using a carpenter’s or string level.
Step-6: Level the Pool’s Base
It may be necessary to readjust the legs of the pool if it is still not horizontal. Remove the nuts that hold the pool’s legs to the plates using a socket wrench. The legs should be shimmed up or down until the pool is even.
Step-7: Adjust the Nuts
When you’re satisfied with the height, tighten the plate nuts. Keep the legs in place by making sure they’re snug, but not so tight that they damage the plates.
Step-8: Refill the Swimming Pool
When the pool’s surface is flat again, water can be added. Keep an eye on the water level as it fills to make sure it stays consistent.
Safety Measures To take when levelling above ground pool
As a result, it’s crucial to guard against potential dangers for the sake of yourself and people close to you. For your own protection, remember these tips for leveling an above-ground pool:
- When digging or working under the pool, it’s important to protect yourself by donning protective gear like sturdy shoes with good traction and gloves. Apply sunscreen, wear a hat, and cover up if you have to be out in the sun for an extended period of time for work.
- Exercise caution when relocating the pool’s heavier components, such as its plates and support legs. Don’t twist your body, and always remember to use your legs to raise rather than your back.
- When setting up an above-ground pool, it’s best to do it with a friend or family member. If you need aid, they can carry large items, keep a level steady, and do other things.
- To ensure the best possible performance of your pool, always refer to the manufacturer’s guidelines. By doing so, you may be confident that you’re operating safely, but also efficiently with the right equipment.
- The pool area is not a place for children or pets to play while you are working. If you’re working on a pool, they’ll likely get in the way or end up in the water.
How To Maintain the pool to last for long time
Above-ground pools require regular upkeep to remain in good condition and extend their useful lifespan. In order to keep your above ground pool in top shape, consider the following:
- Plan out when to clean the pool, treat it, and replace worn out equipment daily, weekly, monthly, and annually.
- Don’t let an issue get worse by not having the necessary chemicals on hand.
- Avoid algae growth by keeping the pool filter on for at least eight hours daily.
- The filter should be cleaned twice yearly and replaced every year or two at the most.
FAQs
How to fix an unlevel pool without draining it?
Pools that aren’t level can be fixed without draining by removing the leveling blocks, prying up the wall, and then replacing the blocks.
How often should the levelling be done?
Above-ground pools need to be leveled at varying intervals based on a number of factors, including ground settlement, climate, and pool use. The water in your pool should be checked once a year at the very least.
How much time does it require?
It is dependent on several factors, including pool size, degree of unevenness, and availability of tools. From a few hours to an entire day, you may need to complete the leveling process.
Conclusion
Even though it can be difficult, leveling an above ground pool that already has water in it is necessary for the pool’s proper operation and safety. The preceding detailed guidelines will help you build a pool that is both level and secure for swimmers and will also assist you with on how to level above ground pool with water in it. If you are doubtful of your abilities in this regard, it is preferable to consult an expert.
